Heavy-duty rear comfort coil spring (+20 mm/50...
Heavy-duty rear comfort coil spring (+20 mm/50 kg) for Toyota Land Cruiser J8/10 - Terrain Tamer

Heavy-duty rear comfort coil spring (+20 mm/50 kg) for Toyota Land Cruiser J8/10 - Terrain Tamer

TTCS-1553
Check availability
€170.78 

€141.14 tax excl.

Reinforced COMFORT rear spring, right and left side.

Compatibility: Toyota Land Cruiser:
Series 8 (HDJ80, FZJ80, HZJ80), from 1990 to 1998
Series 10 (HZJ105, FZJ105), after 1998

Lift: +20 mm

Load: 50 kg

Price per unit

Warranty: lifetime

Photos for illustrative purposes

 
Model
Toyota Land Cruiser J8 (1990–1998)
Toyota Land Cruiser J10 (1998–2007)
OEM
48232-60880
OEM 2
48231-60880

Customers who bought this product also bought:

JUNTA PALIER/BUJE TRASERO J-8 JUNTA PALIER/BUJE TRASERO J-8 2
In stock - Ready to ship
Axles, hubs, and bearings

Halfshaft gasket for Toyota Land Cruiser J4/6/7/8 - Genuine Toyota Land Cruiser part

Toyota
43422-60040
€3.21 

€2.65 tax excl.

Paper gasket for front or rear flange or half-shaft, depending on the vehicle. Compatibility: Toyota Land Cruiser:4 Series (BJ40/42/43/45/46, FJ-40/42), rear / front.6 Series (BJ60, FJ60, HJ60), rear / front7 Series (BJ73, LJ70/73/77), rear / front8 Series (HDJ80, HZJ80, FZJ80), rear half-shaft Price per unit. OEM Original Parts replacement part...
CONO INFERIOR MANGUETA J-8 CONO INFERIOR MANGUETA J-8 2
In stock - Ready to ship
Axles, hubs, and bearings

Lower steering knuckle cone washer for Toyota Land Cruiser J6/7/8 - Genuine Toyota Land...

Toyota
42323-60020
€6.03 

€4.98 tax excl.

Lower front steering knuckle cone, right or left. Compatibility: Toyota Land Cruiser:Series 8 (HDJ80, HZJ80, FZJ80), 1990-1998Series 7 (BJ70/71/73/75, LJ70/73, HZJ70/71/73/74/75/78/79, KZJ70/73/77, PZJ-70/73/75, RJ-70/73)Series 6 (HJ60/61, FJ62).1980-1990 *4 units required per steering knuckle. Price per unit OEM Original Parts replacement part...
ESPARRAGO INFERIOR MANGUETA ESPARRAGO INFERIOR MANGUETA 2
In stock - Ready to ship
Axles, hubs, and bearings

Lower steering knuckle stud for Toyota Land Cruiser J7/8/105 - Genuine Toyota Land...

Toyota
90126-12010
€3.01 

€2.49 tax excl.

Lower steering knuckle stud, right or left. Compatibility: Toyota Land Cruiser:8 Series (HDJ80, HZJ80, FZJ80) 1990 - 19987 Series (HZJ71/74/78/79, HZJ71/76/78/79) 1990 - 200710 Series (HZJ105, FZJ105) 1999 - 2007 * 4 units required per steering knuckle, 8 in total per axle. Price per unit OEM Original Parts replacement part. 90126-12010 9012612010...
RETEN PALIER INTERIOR J-8 RETEN PALIER INTERIOR J-8 2
In stock - Ready to ship
CV joints and axles

Inner front halfshaft seal for Toyota Land Cruiser J8/7 - Genuine Toyota Land Cruiser part

Toyota
90310-35010
€12.83 

€10.60 tax excl.

Inner front hub half-shaft seal, for the right or left side. Compatibility: Toyota Land Cruiser:8 Series (HDJ80, HZJ80, FZJ80) from 1990 to 19987 Series (LJ70, KZJ70/73/77, HZJ70/71/73/74/75/78/79) from 1990 to 2001. Seal diameter: 50 mm outer, 32.5 mm inner, thickness 9.5 mm. *Unit price. Old ref.: 90310-35005, 9031035005 OEM Original Parts replacement...
TUERCA ESPARRAGO INFERIOR MANGUETA TUERCA ESPARRAGO INFERIOR MANGUETA 2
In stock - Ready to ship
Axles, hubs, and bearings

Lower steering knuckle stud nut for Toyota Land Cruiser J4/6/7/8 - Genuine Toyota Land...

Toyota
94115-71200
€1.85 

€1.53 tax excl.

Lower steering knuckle stud nut. Compatibility: Toyota Land Cruiser:Series 8 (HDJ80, HZJ80, FJ80) 1990 - 1998Series 7 (BJ70/71/73/75, HZJ70/73, PZJ70/73/75) 1986 - 1994Series 6 (BJ60, FJ60/62, HJ60/61) 1980 - 1990Series 4 (BJ40/42/43/45/46, FJ40/43/45, HJ47) 1980 - 1985 *4 units required per steering knuckle Price per unit OEM Original Parts replacement...
JUNTA BRIDA DELANTERA J8 ORIGINAL TOYOTA LAND CRUISER JUNTA BRIDA DELANTERA J8 ORIGINAL TOYOTA LAND CRUISER 2
In stock - Ready to ship
Axles, hubs, and bearings

Front flange gasket for Toyota Land Cruiser J8 - Genuine Toyota Land Cruiser part

Toyota
43422-60060
€3.62 

€2.99 tax excl.

Gasket between the outer flange and front wheel hub, (required to fit the outer flange ref: 43421-60040 ) Compatibility: Toyota Land Cruiser Series 8 (HDJ80, HZJ80, FZJ80, FJ80) manufactured between 1990 and 1998 Price per unit. OEM Original Parts replacement part. 43422-60060 4342260060 If in doubt, enquire with the chassis number or VIN. Photos for...
KIT BUJE, TUERCAS 54
In stock - Ready to ship
Axles, hubs, and bearings

Kit of 2 front hub nuts, 54 mm for Toyota Land Cruiser 4/6/7/8/10 - Terrain Tamer

Terrain Tamer
43521-60011K
€17.00 

€14.05 tax excl.

Kit of 2 nuts, for one side of the vehicle, consisting of: 2 large nuts size 54 ref.: 43521-60011 1 hub bearing cap ref.: 90214-42030 1 lock nut seal ref.: 90215-42025 Equivalent replacement to the original. Compatible with Toyota Land Cruiser: Series 8 (HDJ80, HZJ80, FZJ80, FJ80), from 1990 to 1998. Series 10 (HDJ100, UZJ100), from 1998 to 2007. Series...
HOMOCINETICA, CLIP PALIER EXTERIOR J-7/8/10 HOMOCINETICA, CLIP PALIER EXTERIOR J-7/8/10 2
In stock - Ready to ship
CV joints and axles

Halfshaft clip outside flange for J7/8/10 - Genuine Toyota Land Cruiser part

Toyota
90520-31007
€3.32 

€2.74 tax excl.

Outer axle shaft clip, after the flange, thickness 2.2 mm. Compatibility: Toyota Land Cruiser:8 Series (HDJ80, HZJ80, FZJ80, FJ80) from 1990 to 199810 Series (HDJ100, UZJ100) from 1998 to 2007Series 7 (FZJ70/71/73/74/75/78/79, KZJ70/77) from 1990 to 1999 Price per unit. OEM Original Parts replacement part. 90520-31007 9052031007 Photos for illustrative...
Product added to wishlist